Laser pipe cutting machine use precautions

Suzhou Quick Laser Technology Co., Ltd.2022-07-12

The working principle of the laser pipe cutting machine is through the computer, hydraulic cooperation, by the electrical system to control the direction of the hydraulic system of the oil circuit movement, push the dragging plate for a straight line round trip movement. The microcomputer will walk according to the user's own knife route, in the round-trip movement, from the signal detected by the dragging plate limit for the basis, control and change its oil circuit movement, so as to achieve the expected knife route.

The use of laser pipe cutting machine pay attention to several major points.

1. Spindle speed change must be carried out after parking. Gears should be fully engaged when changing speed. When the machine is found to be abnormal, stop immediately to check.

2. Before cutting to adjust the tool, clamping workpiece. The length of the clamping part must not be less than 50 mm. Parking stopper should be fixed, after clamping, loosening, forward, backward and other sequential test drive before work is carried out.

3. When the machine tool is rotating, no part of the human body shall touch the transmission parts. When operating, tie the cuffs and work with gloves is strictly prohibited. The human head should deviate from the cutting direction.

4. When changing tools, measuring workpieces, lubricating and cleaning the pipe head, you must stop the machine.

5. When cutting the pipe head, prevent the pipe head from flying out and injuring people.

6. When putting long tubes into the material frame and loosening the bundle of lead wire, measures should be taken to prevent the tubes from rolling, impacting and crushing people. 　　

7. The use of grinding wheel pipe cutting machine, should be checked in advance for defects and cracks in the grinding wheel piece, moisture, and whether the power cord is reliable.

8. The dust removal device of the pipe cutting machine should be intact before cutting.

9. In the workpiece in the direction of the material should not stand people.

Ultra Heavy-duty Laser Tube Cutting Machines

The Ultra Heavy-duty Laser Tube Cutting Machines from Quick Laser have a large clamping range and a high load capacity. With a maximum clamping range of 500mm and a maximum load capacity of 1t, it fills the gap for heavy-duty tube cutting requirements. Easy to operate and easy to use, it is a highly efficient laser cutting machine.

Suzhou Quick Laser Technology Co., Ltd. is a professional laser equipment manufacturer integrating design, manufacture and sales. After years of technology and experience, we now have a production base of 400,000 square meters, focusing on laser tube cutting machine, laser tube cutting machine and other processing equipment. If you are interested in our products, please contact us as soon as possible!